.
.      Digital television service operators wishing to aggregate and process MPEG, ATSC, Digicypher, or DVB based services for traditional (satellite, cable, terrestrial) or next generation IPTV based services will find the DTA ideal. It boasts 10 ASI inputs. Each supporting wire speed, a three-way mirrored ASI output, GIGE, and optional SMPTE-310. Redundancy for ASI and SMPTE-310 is supported with an intelligent built in relay-bypassed switch. The DTA-3050 is IPTV and BBTV ready today, it supports multicast and unicast configurations including SPTS/UDP or RTP, MPTS/UPD or RTP, MPEG and DVB tables. Encryption support includes DVB-CSA with Ethernet Simylcrypt, AES for use with Simylcrypt compatible Conditional Access management Servers (CAS) vendors. The DTA 3050 is ideal for traditional and next generation television networks. .
.
Features
.
  • Conditional Access: The DTA-3050 provides DVB-CSA and BISS encryption and AES conditional access encrypt and decrypt capabilities. DVB-CSA encryption is available as fixed key BISS or Simulcrypt based interfaces compatible with most major DVB-CSA CAS vendors. AES decryption and encryption include support for Adtec's OST for Transport and Verimatrix VCAS for residential set top and computer-based decryption.

  • Aggregation of ASI, SMPTE-310, or IP based SPTS or MPTS services: The DTA-3050 provides ten ASI input ports enabling it to aggregate locally encoded SPTS or re-muxed MPTS from encoders, receivers, video servers or other devices providing MPEG 2 Transport via ASI or IP.

  • IPTV: Gigabit Ethernet distribution of digital television services includes MPTS, SPTS over UDP, RTP for Set Top, or computer decoding and MPTS over UDP or RTP for bundled distribution (Digital Simulcast).

  • ASI: An optional 3 port mirrored ASI output interface provides integration with traditional distribution methods including Cable, Satellite, and Terrestrial.

  • SMPTE-310: An optional 2 port mirrored SMPTE-310 output interface provides integration with ATSC distribution.

  • Flexible Configuration & Control: Controlling and configuring the DTA-3050 is easy. Whether using the integrated front panel keypad and LCD, Terminal or remote Web page interface, they respond rapidly and reliably to the desires of the operator.

  • IPTV Electronic Program Guide: Adtecís Middleware Application Server integrates with the DTA to deliver an interactive electronic program guide to IP based Set Tops. Adtec's edjeVOD enterprise VOD server, an optional service installed on the Middleware Application Server, is ideal for small stream count implementations like medical, educational or hospitality. Interfaces to external VOD servers facilitate large stream count VOD requirements including direct to home Telco TV.


    		• .
    .
    Reference
    .
    Datasheet

    Front Panel Illustration

    Back Panel Illustration

    		.
    .
    Options & Accessories
    .
    DTA-ASI-KEY: The DTA-3050 comes standard with 5 unlocked ASI ports. Additional ports (up to 5 more) can be unlocked for use by purchasing a DTA-ASI-KEY.

    DVB-CSA: Encryption Algorithm feature for DTA's. Capable of encrypting 280 Mbs and is supported via ASI and IP egress.

    DVB-AES: AES Scrambling Algorithm feature for DTA's. Capable of encrypting 280 Mbs. Used for IPTV with Verimatrix server.

    DTVGUIDE: DTV Guide Service.     		.
    .
    Related Products
    .
    mediaHUB-HD 422:
    High and Standard Definition Multi-CODEC Contribution and Distribution Encoder

    mediaHUB-HD Pro:
    High and Standard Definition Contribution and Distribution Encoder

    edje-5110:
    Real-Time Distribution Encoder

    IPTVManage:
    Enterprise Management Server

    		.
    .
    .
    .

    Technical Specifications


    Front Panel
    • 8 Button Tactile Raised keypad: Mode, Select, Enter, Escape, Up, Down,Left, Right
    • Blue Translucent LCD 20 character by 2 row
    • Front Panel Host LEDs Power, Alarm, Link, Busy, MPE
    • Front Panel LEDs In : 1 - 10 ASI Out : Alarm, ASI, SMPTE 310, CA, GigE

    ASI Inputs
    • ASI x 10 (BNC)
    • 188 or 204 Byte mode
    • SPTS or MPTS
    • 211 Mbps per input
    • 256 PIDs per input
    • Fill scrubbing on input
    • Input Modes Auto (Remap all services) Manual (Add/Drop/Remap PID/Services) Pass (Pass all services as-is) MHP Injector SI Injector

    Redundancy
    • 1+1 IP and ASI
    • ASI x 2 (BNC inputs for auto switch)
    • No external controller required

    Outputs
    • Gigabit Ethernet SPTS over UDP or RTP MPTS over UDP or RTP 211 Mbs Very low jitter

    • ASI
      (model is DTA 3050-ASI) Mirrored (BNC x 3) Byte or Burst Mode
         54 Mbs Byte
         211 Mbs Burst Jitter less than 150 (nS)

    • SMPTE-310
      (model is DTA 3050-SMPTE-310) Mirrored (BNC x 2) Byte Mode only 19.39 Mbs fixed SMPTE-310 option includes ASI

    Table Processing
    • No Tables
    • MPEG Tables PAT CAT (if CA is enabled) PMT
    • DVB Tables (Add/Drop/Remap DVB Services) NIT SDT TDT/TOT EIT
    • ATSC Tables (Add/Drop/Remap ATSC Services) VCT (Cable or Terrestrial) MGT STT RRT EIT (1-4)
    • DCII Tables (Add/Drop/Remap Digicypher services to DVB or ATSC)
    IP Data Encapsulation (ISO 13818-6 MPE)
    • EN 301 192 Encapsulation of IP Datagrams over
    • Unicast and Multicast Support
    • 32 Routes
    • 32 PIDs

    IP Data de-capsulation (ISO 13818-6 MPE)
    • EN 301 192 de-capsulation of IP Datagrams

    Conditional Access Encryption
    • DVB-Common Scrambling Algorithm (CSA)
    • DVB Simulcrypt TS 103 197 v 1.2.1
    • FIPS 140-2 hardware based random number generator (RNG)
    • Advanced Encryption Standard (AES) Adtec Open Secure Transport (OST) IP based encryption for use with Adtec IRDs IP Set Top and Computer compatibility
    • Approved 3rd Party CA Vendors include: CSA:    Irdeto    Conax    EuroCAS    KeyFly    Xcrypt
    • AES: Verimatrix Adtec OST
    Host Platform
    • PowerPC
    • Adtec optimized Linux Kernel
    • 10/100 Ethernet RJ-45 (Eth 0)
    • 10/100/1000 Ethernet RJ-45 (Eth 1)
    • Serial Port (RJ-48)
    • USB 2.0 (2)
    • IEEE 1394 (Firewire)
    • N.C. / N.O. Tally Interface
    • XML Configuration
    • HTTP, FTP, Telnet, IP Logging, DHCP, (XCP Adtec encrypted layer 3 protocol)
    Power
    • 70-240 VAC switching power supply
    • 50/60 Hertz
    • Rated at 94 Watts return nominal usage 20 watts
    Physical
    • 19 in. wide, 1.75 in. tall, 16 in. deep, (483 x 44.5 x 406 mm)
    • 1 Rack Unit
    • Weight 13lbs.

    Environmental
    • Active cooling (Push pull Fans)
    • Operating: 0 to +50 degrees C
    • Storage: -30 to +65 degrees C
    • Less than 70% RH
    • Non-Condensing

    Specifications Disclaimer: Specifications subject to change without written notice. Copyright 2009 Adtec Digital. DTA-3050 is a trademark of Adtec Digital. Other product and company names may be trademarks or registered trademarks of their respective companies. This information may not, in whole or in part, be copied, photocopied, reproduced and translated, or reduced to any electronic medium or machine-readable form without prior consent in writing from Adtec Digital.

    		.
    .

    Adtec Digital is a leading developer of digital and IPTV products and solutions including encoders, decoders, multiplexers, ad servers and management servers. With over 23 years experience in media distribution and control, Adtec offers customers rock solid engineering, powerful features and the ability to generate unmatched bottom line revenue.