SDIAUDIOMATRIX SMX S0

Description:

      SDI Audio Matrix allows any of the eight channels of audio originating
      from the decoder to be routed to any of the eight audio outputs on the SDI
      interface. This enables the customization of the audio channel mappings 
      from their default configuration.
      
      The default mapping is shown below:
      
         SDI Output CH1=Decoder Originating CH 1
         SDI Output CH2=Decoder Originating CH 2
         SDI Output CH3=Decoder Originating CH 1
         SDI Output CH4=Decoder Originating CH 2
         SDI Output CH5=Decoder Originating CH 5
         SDI Output CH6=Decoder Originating CH 6
         SDI Output CH7=Decoder Originating CH 7
         SDI Output CH8=Decoder Originating CH 8
      
      NOTE: Only the first two channels, 1 & 2, are available originating from
            the decoder at this time. The other channels originating from the
            decoder will not carry any audio data.
      
      The CONFIGURATION SAVE command (*.DCMD CFG SAVE) will save the setting in
      non-volatile memory.

Form:

      Command Handler: DCMD
      SDIAUDIOMATRIX|SMX|S0 [CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8]
      Argument List:
      CH1           Sets the input audio source for channel 1.
      CH2           Sets the input audio source for channel 2.
      CH3           Sets the input audio source for channel 3.
      CH4           Sets the input audio source for channel 4.
      CH5           Sets the input audio source for channel 5.
      CH6           Sets the input audio source for channel 6.
      CH7           Sets the input audio source for channel 7.
      CH8           Sets the input audio source for channel 8.
      
                    Note: Valid audio channels are 1-8.

Response:

      SDIAUDIOMATRIX RESPONSE
        Verbose- "OK\r\n" to acknowledge receipt of command, or
                 "ERROR- [Description]\r\n" if error, ending command
        Terse-   "0\r\n" to acknowledge receipt of command, or
                 "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command
                 "\r\n" concludes modify responses (empty line)

Examples:

      Verbose command to get the SDI Audio Matrix configuration.
      
      *.DCMD SMX<enter>
         Response is: OK\r\n
                      SDIAUDIOMATRIX CH1=1 CH2=2 CH3=1 CH4=2 CH5=5 CH6=6 CH7=7
                                     CH8=8
                                     
      Terse command to get the SDI Audio Matrix configuration.
      
      *.DCMD S0<enter>
         Response is: OK\r\n
                      1, 2, 1, 2, 5, 6, 7, 8,
                      
      Verbose command to set the SDI Audio Matrix configuration.
      
      *.DCMD SMX 1 2 3 4 5 6 7 8<enter>
         Response is: OK\r\n
         
      Terse command to set the SDI Audio Matrix configuration.
      
      *.DCMD S0 1 2 3 4 5 6 7 8<enter>
         Response is: 0\r\n

Notes:

      Only the first two channels, 1 & 2, are available originating from the
      decoder at this time. The other channels originating from the decoder will
      not carry any audio data.
      
      The CONFIGURATION SAVE command (*.DCMD CFG SAVE) will save the setting in
      non-volatile memory.

Products Supporting Command:

Created By: Adtec Digital Inc