RTP RTP R1

Description:

  Enable or disable the use of RTP for the encoder's multicast send.

Form:

  Command Handler: ECMD
  RTP|RTP|R1
  Argument List:
  Terse    Verbose      Description
  0        OFF          Disable RTP
  1        ON           Enable RTP

Response:

  MODIFY RTP RESPONSE
    Verbose- "OK\r\n" to acknowledge receipt of command, or
             "ERROR- [Description]\r\n" if error, ending command
    Terse-   "0\r\n" to acknowledge receipt of command, or
             "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command
    "\r\n" concludes modify responses (empty line)

  DISPLAY RTP RESPONSE
    Verbose- "OK\r\n" to acknowledge receipt of command, followed by
             "CONSTANTCAPTURE= [ON/OFF]\r\n", or
               "ERROR- [Description]\r\n" if error, ending command
    Terse-   "0\r\n" to acknowledge receipt of command, followed by
             "[TERSE NUMERIC VALUE]\r\n", or
             "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command
    "\r\n" concludes display responses (empty line)

Examples:

  Verbose command to retrieve current setting:
  *.ECMD RTP <enter>
     Response is: OK\r\n
                  RTP= OFF\r\n

 Terse command to retrieve current setting:
  *.ECMD R1 <enter>
     Response is: 0\r\n
                  0\r\n

  Verbose command to change setting:
  *.ECMD RTP ON <enter>
     Response is: OK\r\n

  Terse command to change setting:
  *.ECMD R1 0 <enter>
     Response is: 0\r\n

Notes:

  None.

Products Supporting Command:

Created By: Adtec Digital Inc