OUTPUTSTATE _OUTPUTSTATE *---------------------------------------------------------------------------- * * * **********End TCmdINPUTTS object*********************/ Description: Enable, disable, clear, and drop output. Form: Command Handler: MCMD OUTPUTSTATE|_OUTPUTSTATE [KEY] [SETTING PARAMETERS] OPTION: Output Key. SETTING PARAMETERS: "ENABLE" [Enable output] "DISABLE" [Disable output] (Option Not valid For ASI Outputs) "CLEAR" [Clear all program info from output] (Option Not valid For ASI Outputs) "DROP" [Drop Output] (Option Not valid For ASI Outputs) Response: "OK\r\n" to acknowledge receipt of command, or "OK\r\n" to acknowledge receipt of command and display output enable state. "ERROR- [Description]\r\n" if error, ending command "\r\n" concludes modify responses (empty line) Examples: *.MCMD OUTPUTSTATE OK\r\n [KEY] [TYPE] OUTPUTSTATE = [STATE] 0- ASI OUTPUTSTATE = ENABLED 1- IP OUTPUTSTATE = DISABLED 2- IP OUTPUTSTATE = ENABLED 3- IP OUTPUTSTATE = ENABLED 4- IP OUTPUTSTATE = DISABLED 5- IP OUTPUTSTATE = ENABLED 6- IP OUTPUTSTATE = ENABLED *.MCMD OUTPUTSTATE 0 OK\r\n [KEY] [TYPE] OUTPUTSTATE = [STATE] 0- ASI OUTPUTSTATE = ENABLED r\n *.MCMD OUTPUTSTATE 1 ENABLED Response is: OK\r\n \r\n Notes: Products Supporting Command: dta3050, dta3000, dta3050 Created By: Adtec Digital Inc