LIST LST LI Description: Displays or changes the current playlist. The list contains the name of the list, the current list pointer position (shows which spot is currently playing, or if the transport is stopped, the spot that will play when the PLAY command is issued) and the spots in the list. The verbose form of the command also shows the characteristics of each spot. The characteristics are the same as the DIR S command verbose output. Form: Command Handler: DCMD <NAME.DEST> LIST|LST|LI [ARGUMENT] DEST Argument: DCMD Decoder Command System Argument List: Terse Verbose Description none CLEAR Clears the list. none LOAD filename Loads the specified list file into the system filename example: playlist.smil. none PTR <INDEX> Change the pointer to the argued index. none ADD <SPOTNAME> Add SPOTNAME to the end of the current list. none ADDM <SPOTNAME> Add SPOTNAME to the end of the current list. none SAVE Saves volatile list to non-volatile memory. Response: MODIFY LIST RESPONSE Verbose- "OK\r\n" to acknowledge receipt of command, or "ERROR- [Description]\r\n" if error, ending command Terse- "0\r\n" to acknowledge receipt of command, or "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command "\r\n" concludes modify responses (empty line) DISPLAY LIST RESPONSE Verbose- "OK\r\n" to acknowledge receipt of command, followed by "List pointer is m, n program(s) in the list\r\n", or "ERROR- [Description]\r\n" if error, ending command Terse- "0\r\n" to acknowledge receipt of command, followed by "[TERSE NUMERIC VALUE]\r\n", or "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command "\r\n" concludes display responses (empty line) Examples: Verbose command to retrieve current setting: *.DCMD LIST <enter> Response is: OK\r\n "/mnt/hd/media/list/test.smil"\r\n 1- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2\r\n 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam\r\n Ch2.mpg"\r\n 2- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2\r\n 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam\r\n Ch2.mpg"\r\n List Pointer is 1, 2 program(s) in the list\r\n \r\n Terse command to retrieve current setting: *.DCMD LI <enter> Response is: 0\r\n 0000\r\n "/mnt/hd/media/list/test.smil"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n \r\n Verbose command to change setting: *.DCMD LIST CLEAR <enter> Response is: OK\r\n Terse command to change setting: *.DCMD LI CLEAR <enter> Response is: 0\r\n Verbose command to change the pointer index in the list: *.DCMD LIST PTR <2> <enter> Response is: OK\r\n Terse command to change the pointer index in the list: *.DCMD LI PTR <2> <enter> Response is: 0\r\n Verbose command to add a spot to the end of the list: *.DCMD LIST ADD <SPOT.MPG> <enter> Response is: OK\r\n "/mnt/hd/media/list/test.smil"\r\n 1- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2\r\n 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam\r\n Ch2.mpg"\r\n 2- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2\r\n 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam\r\n Ch2.mpg"\r\n 2- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2\r\n 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam\r\n SPOT.MPG"\r\n List Pointer is 1, 3 program(s) in the list\r\n \r\n Terse command to add a spot to the end of the list: *.DCMD LI ADD <SPOT.MPG> <enter> Response is: 0\r\n 0000\r\n "/mnt/hd/media/list/test.smil"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam SPOT.MPG"\r\n \r\n Verbose command to save the list to non-volitile memory: *.DCMD LIST SAVE <enter> Response is: OK\r\n "/mnt/hd/media/list/test.smil"\r\n 1- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n 2- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n 2- 04/05/06 19:58 13.703 Mbytes spts mpeg2 dolby_ac3 layer2 00:00:29.990 3.75 Mbps "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam SPOT.MPG"\r\n List Pointer is 1, 3 program(s) in the list\r\n \r\n Terse command to save the list to non-volitile memory: *.DCMD LI SAVE <enter> Response is: 0\r\n 0000\r\n "/mnt/hd/media/list/test.smil"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam Ch2.mpg"\r\n "/mnt/hd/media/mediahub Vod Ac3 Ch1 Mcam SPOT.MPG"\r\n \r\n Notes: The legacy ADDM command option is not currently implemented where it will accept multiple spots as arguments. The legacy ADDM however will work identically to the legacy ADD command where it will add the single argued spot to the end of the currently loaded list. The legacy PTR command option currently does not give the location of the index in the currently loaded list. Use the list command to find the location of the index. Use the PTR option to set the pointer to a new index only. The new pointer location will take effect when the currently playing spot is finished. Several LISTs can exist on the same unit. They are stored in the /mnt/hd/media/list directory and can be loaded at any time by using the "LIST LOAD filename" command. All list file names use the 'smil' extension. It is important to note that the default location for a list file, if only a file name is argued, is /mnt/hd/media/list. The filename may contain spaces if the filename is surrounded by double quotes. Valid command format: LIST LOAD "test clips.smil" Invlaid command format: LIST LOAD test clips.smil Products Supporting Command: mediaHUB mediahub-hd SoloistHD4111 edjeHD4111 signEdjeHD SoloistHD Pro Created By: Adtec Digital Inc