FTPDATATIMEOUT FDO FU Description: Displays or sets the maximum time in seconds that the FTP Client waits on inactivity with the remote system data connection during a file transfer. Default value is 45 seconds. Form: Command Handler: SYSD FTPDATATIMEOUT|FDO|FU [ARGUMENT] Argument: Time in seconds. No Argument: Shows current setting. Response: WITH ARGUMENT Verbose- "OK\r\n" to acknowledge receipt of command, or "ERROR- [Description]\r\n" if error, ending command Terse- "0\r\n" to acknowledge receipt of command, or "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command "\r\n" concludes modify responses (empty line) WITHOUT ARGUMENT Verbose- "OK\r\n" to acknowledge receipt of command, followed by "FTPDataTimeout= <SETTING>\r\n", or "ERROR- [Description]\r\n" if error, ending command Terse- "0\r\n" to acknowledge receipt of command, followed by "<SETTING>\r\n", or "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command "\r\n" concludes modify responses (empty line) Examples: Verbose command to set Local Media Directory: *.SYSD FTPDATATIMEOUT 45<enter> Response is: OK\r\n \r\n Verbose command to show Local Media Directory setting: *.SYSD FTPDATATIMEOUT<enter> Response is: OK\r\n FTPDataTimeout= 45\r\n \r\n Notes: Related commands: HOSTMODE, HOSTTIMER, HOSTIPADDRESS, MIRRORLISTFILE, CLTUSERPASSWORD, FTPTIMEOUT, DONOTREPLACEMPEG, FTPCLIENTPASV Products Supporting Command: mediaHUB mediahub-hd DPI 1200 SoloistHD4111 edjeHD4111 signEdjeHD SoloistHD Pro Created By: Adtec Digital Inc