DVBASILATENT DLT DL Description: Sets the latency delay before the decoder begins play back from the DVB ASI source. The latency is argued as a millisecond value. The minimum allowed latency is 100 milliseconds. The default DVBASILATENT setting is 100 milliseconds The DVBASILATENT setting is saved in the DCMD CONFIGURATION file. If the DVBASILATENT delay time is too large, and the internal delay buffer is about to overflow, the system will start the DVB ASI playback early to prevent the overflow. A log message is generated when this condition occur Form: Command Handler: DCMD DVBASILATENT|DLT|DL [VALUE] Argument List: Terse Verbose Description VALUE none Sets the value of the latency delay in milliseconds. Default value is 100 milliseconds. Minimum allowed value is 100 milliseconds. . Response: DVBASILATENT RESPONSE Verbose- "OK\r\n" to acknowledge receipt of command, or "ERROR- [Description]\r\n" if error, ending command Terse- "0\r\n" to acknowledge receipt of command, or "[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command "\r\n" concludes modify responses (empty line) Examples: Verbose command to retrieve current setting: *.DCMD DVBASILATENT <enter> Response is: OK\r\n DVBASILATENT= 500\r\n Verbose command to change setting: *.DCMD DVBASILATENT 1000 <enter> Response is: OK\r\n Terse command to change setting: *.DCMD DL 1000 <enter> Response is: 0\r\n Notes: None. Products Supporting Command: mediahub-hd mediahub-hd422 SoloistHD Pro Created By: Adtec Digital Inc